MDM Advance Pumps

For Pricing and Sizing Assistance, Please Call Us at 844-946-4272

The Advance line of pumps is made up of three distinct families. Each family (Advance 1000, 3000, and 4000) are rugged, efficient pumps designed to operate under a wide variety of flow rates and pressure situations, all while maintaining the consistent flow required for your facility. For sizing and pricing, please review the information below, and give us a call to discuss your project needs!

Advance 1000: The Advance 1000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.

We also offer the Advance 1000 line in polypropylene. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys.
Advance 3000: The Advance 3000 is a close coupled, end suction centrifugal pump line which is molded in Noryl®. Its high-efficiency design makes it suitable for medium flows [to 60 GPM] and higher heads [up to 160’TDH]. When fitted with the patented Impenatra® Seal, the Advance 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. Flows up to 60 GPM and head pressures up to 67 PSI.

The Advance 3000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.
Advance 4000: The Advance 4000 is a close coupled, end suction centrifugal pump line which is molded in glass-filled polypropylene. Its high-efficiency design makes it suitable for medium flows [to 200 GPM] and higher heads [up to 80’ TDH]. When fitted with the patented Impenatra® Seal, the Advance 4000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit.

The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys.

Additional Details

Often the best design is also the simplest. And the Advance line by MDM is no exception. The hydraulic wet end consists of only three major components: casing, impeller and a mounting bracket. The impeller is directly attached to the motor shaft and threaded against rotation.
The Advance product line is molded out of high-quality glass-filled polymer, which gives it many advantages. It has good resistance to most acids, alkalis and inorganics. This polymer has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.
Engineered for high efficiency, Advance impellers are available as semi-open or enclosed to accommodate a wide variety of flows, pressures and fluids.
The pump can be close coupled to a 56J motor or mounted to a bearing pedestal. Both single and three phase motors in ODP and TEFC enclosures are readily available. An adapter kit is available to convert a 56C keyed-shaft motor to a 56J mount. A variety of elastomers, seals, impellers, and motors, can be combined to meet your exact requirements. All units are bench tested prior to shipping.

Corrosion Resistance

Sodium Hydroxide (10%)
Demineralized Water
Ammonium Hydroxide (10%)
Ethylene Glycol
Sodium Bicarbonate (SAT.)
Nitric Acid (10%• Ammonium Phosphate (SAT.)
Ferric Chloride (SAT.)
Hydrochloric Acid (10%, 37%)
Acetic Acid (10%)
Potassium Bicarbonate (SAT.)
Sulphuric Acid (10%, 60%)
Nickel Plating Solutions

To make a purchase, or for more information, please contact us at 844-946-4272 or email at info@globalaquaculturesupply.com.

Full Description

Quantity

Add to wishlist

Advance 1000: The Advance 1000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.

We also offer the Advance 1000 line in polypropylene. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys.
Advance 3000: The Advance 3000 is a close coupled, end suction centrifugal pump line which is molded in Noryl®. Its high-efficiency design makes it suitable for medium flows [to 60 GPM] and higher heads [up to 160’TDH]. When fitted with the patented Impenatra® Seal, the Advance 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. Flows up to 60 GPM and head pressures up to 67 PSI.

The Advance 3000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.
Advance 4000: The Advance 4000 is a close coupled, end suction centrifugal pump line which is molded in glass-filled polypropylene. Its high-efficiency design makes it suitable for medium flows [to 200 GPM] and higher heads [up to 80’ TDH]. When fitted with the patented Impenatra® Seal, the Advance 4000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit.

The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many applications at a fraction of the cost of exotic alloys.

Additional Details

Often the best design is also the simplest. And the Advance line by MDM is no exception. The hydraulic wet end consists of only three major components: casing, impeller and a mounting bracket. The impeller is directly attached to the motor shaft and threaded against rotation.
The Advance product line is molded out of high-quality glass-filled polymer, which gives it many advantages. It has good resistance to most acids, alkalis and inorganics. This polymer has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.
Engineered for high efficiency, Advance impellers are available as semi-open or enclosed to accommodate a wide variety of flows, pressures and fluids.
The pump can be close coupled to a 56J motor or mounted to a bearing pedestal. Both single and three phase motors in ODP and TEFC enclosures are readily available. An adapter kit is available to convert a 56C keyed-shaft motor to a 56J mount. A variety of elastomers, seals, impellers, and motors, can be combined to meet your exact requirements. All units are bench tested prior to shipping.